Everything you need to know about ceiling fan downrod
A ceiling fan downrod is a metal pipe that connects the motor housing to the mounting hardware, stabilising the ceiling fan and reducing the potential for unsteady. A downrod additionally aids in correct flowing by ensuring a secure distance between the ceiling fan blades and also the ceiling, a minimum of eight – ten inches, and between the fan blades and also the floor, a minimum of seven feet.
Downrods range in diameter and length depending on the ceiling fan type and application. normal ceiling fans include a downrod ranging in length from three inches to six inches, that is appropriate for traditional size rooms with a ceiling height of eight – nine feet. However, fan downrods will vary up to 177 inches counting on the manufacturer.
Here’s an easy guide to assist you discover the proper ceiling fan downrod length for any area in your home.
Calculate Ceiling Fan Downrod Length
Ceiling fans offer best flowing once suspended eight – nine feet from the ground. Hanging a ceiling fan too high or too low may end up in poor air flow in a room, inflicting your ceiling to figure harder and use additional energy than it needs too. the incorrect height may also lead to an ill-fitted looking ceiling fan.
A method usually used to find the proper downrod length is that the ceiling height minus the peak of the ceiling fan, minus the specified hanging height (usually eight feet). for instance, if your ceiling is ten feet tall and your ceiling fan is twelve inches tall, you may want a 1-foot downrod to mount the ceiling fan eight feet on top of the ground.
The following chart shows the length of the down rod you should use based on the height of your ceilings
9’ - 6” down rod
10’ - 12” down rod
12’ -24” down rod
14’ -36” down rod
16’ -48” down rod
18’ - 60” down rod
20’ - 72” down rod
If the ceiling you are mounting your fan on is sloped you may want a special mounting bracket, this will enable the fan to swivel and suspend straight down. Most makers provide many types of mounting brackets however make sure before you purchase your ceiling fan that the style you need is available. With a sloped ceiling you should also be conscious of the angle of slope and the blades diameter to ensure proper clearance.
If you’ve got a vaulted ceiling in your home the guidelines for fan size is also slightly different. you must measure the ceiling from the highest point to get an idea of the slope of the ceiling, and to conform that the downrod is long enough so that the blades don’t seem to be touching the two slopes. it’s additionally important that the fan doesn’t hang too low. different slopes clearly need different downrods and determining the proper ceiling fan size will be troublesome. Contacting a local or on-line fan specialist is your best bet to make sure you get and install the perfect size fan for the room.